camel-mllp-kafka-connector sink configuration

When using camel-mllp-kafka-connector as sink make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-mllp-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

The camel-mllp sink connector supports 25 options, which are listed below.

Name	Description	Default	Priority
camel.sink.path.hostname	Hostname or IP for connection for the TCP connection. The default value is null, which means any local IP address	null	HIGH
camel.sink.path.port	Port number for the TCP connection	null	HIGH
camel.sink.endpoint.autoAck	Enable/Disable the automatic generation of a MLLP Acknowledgement MLLP Consumers only	true	MEDIUM
camel.sink.endpoint.bufferWrites	Enable/Disable the buffering of HL7 payloads before writing to the socket.	false	LOW
camel.sink.endpoint.hl7Headers	Enable/Disable the automatic generation of message headers from the HL7 Message MLLP Consumers only	true	MEDIUM
camel.sink.endpoint.requireEndOfData	Enable/Disable strict compliance to the MLLP standard. The MLLP standard specifies START_OF_BLOCKhl7 payloadEND_OF_BLOCKEND_OF_DATA, however, some systems do not send the final END_OF_DATA byte. This setting controls whether or not the final END_OF_DATA byte is required or optional.	true	MEDIUM
camel.sink.endpoint.stringPayload	Enable/Disable converting the payload to a String. If enabled, HL7 Payloads received from external systems will be validated converted to a String. If the charsetName property is set, that character set will be used for the conversion. If the charsetName property is not set, the value of MSH-18 will be used to determine th appropriate character set. If MSH-18 is not set, then the default ISO-8859-1 character set will be use.	true	MEDIUM
camel.sink.endpoint.validatePayload	Enable/Disable the validation of HL7 Payloads If enabled, HL7 Payloads received from external systems will be validated (see Hl7Util.generateInvalidPayloadExceptionMessage for details on the validation). If and invalid payload is detected, a MllpInvalidMessageException (for consumers) or a MllpInvalidAcknowledgementException will be thrown.	false	MEDIUM
camel.sink.endpoint.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	MEDIUM
camel.sink.endpoint.basicPropertyBinding	Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM
camel.sink.endpoint.synchronous	Sets whether synchronous processing should be strictly used (this component only supports synchronous operations).	true	MEDIUM
camel.sink.endpoint.charsetName	Set the CamelCharsetName property on the exchange	null	MEDIUM
camel.sink.endpoint.keepAlive	Enable/disable the SO_KEEPALIVE socket option.	"true"	MEDIUM
camel.sink.endpoint.receiveBufferSize	Sets the SO_RCVBUF option to the specified value (in bytes)	"8192"	MEDIUM
camel.sink.endpoint.sendBufferSize	Sets the SO_SNDBUF option to the specified value (in bytes)	"8192"	MEDIUM
camel.sink.endpoint.tcpNoDelay	Enable/disable the TCP_NODELAY socket option.	"true"	MEDIUM
camel.sink.endpoint.connectTimeout	Timeout (in milliseconds) for establishing for a TCP connection TCP Client only	30000	MEDIUM
camel.sink.endpoint.idleTimeout	The approximate idle time allowed before the Client TCP Connection will be reset. A null value or a value less than or equal to zero will disable the idle timeout.	null	MEDIUM
camel.sink.endpoint.readTimeout	The SO_TIMEOUT value (in milliseconds) used after the start of an MLLP frame has been received	5000	MEDIUM
camel.sink.endpoint.receiveTimeout	The SO_TIMEOUT value (in milliseconds) used when waiting for the start of an MLLP frame	15000	MEDIUM
camel.component.mllp.lazyStartProducer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	MEDIUM
camel.component.mllp.basicPropertyBinding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM
camel.component.mllp.defaultCharset	Set the default character set to use for byte to/from String conversions.	"ISO-8859-1"	MEDIUM
camel.component.mllp.logPhi	Set the component to log PHI data.	"true"	MEDIUM
camel.component.mllp.logPhiMaxBytes	Set the maximum number of bytes of PHI that will be logged in a log entry.	"5120"	MEDIUM

Name

Description

Default

Priority

camel.sink.path.hostname

Hostname or IP for connection for the TCP connection. The default value is null, which means any local IP address

null

HIGH

camel.sink.path.port

Port number for the TCP connection

null

HIGH

camel.sink.endpoint.autoAck

Enable/Disable the automatic generation of a MLLP Acknowledgement MLLP Consumers only

true

MEDIUM

camel.sink.endpoint.bufferWrites

Enable/Disable the buffering of HL7 payloads before writing to the socket.

false

LOW

camel.sink.endpoint.hl7Headers

Enable/Disable the automatic generation of message headers from the HL7 Message MLLP Consumers only

true

MEDIUM

camel.sink.endpoint.requireEndOfData

Enable/Disable strict compliance to the MLLP standard. The MLLP standard specifies START_OF_BLOCKhl7 payloadEND_OF_BLOCKEND_OF_DATA, however, some systems do not send the final END_OF_DATA byte. This setting controls whether or not the final END_OF_DATA byte is required or optional.

true

MEDIUM

camel.sink.endpoint.stringPayload

Enable/Disable converting the payload to a String. If enabled, HL7 Payloads received from external systems will be validated converted to a String. If the charsetName property is set, that character set will be used for the conversion. If the charsetName property is not set, the value of MSH-18 will be used to determine th appropriate character set. If MSH-18 is not set, then the default ISO-8859-1 character set will be use.

true

MEDIUM

camel.sink.endpoint.validatePayload

Enable/Disable the validation of HL7 Payloads If enabled, HL7 Payloads received from external systems will be validated (see Hl7Util.generateInvalidPayloadExceptionMessage for details on the validation). If and invalid payload is detected, a MllpInvalidMessageException (for consumers) or a MllpInvalidAcknowledgementException will be thrown.

false

MEDIUM

camel.sink.endpoint.lazyStartProducer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

MEDIUM

camel.sink.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.sink.endpoint.synchronous

Sets whether synchronous processing should be strictly used (this component only supports synchronous operations).

true

MEDIUM

camel.sink.endpoint.charsetName

Set the CamelCharsetName property on the exchange

null

MEDIUM

camel.sink.endpoint.keepAlive

Enable/disable the SO_KEEPALIVE socket option.

"true"

MEDIUM

camel.sink.endpoint.receiveBufferSize

Sets the SO_RCVBUF option to the specified value (in bytes)

"8192"

MEDIUM

camel.sink.endpoint.sendBufferSize

Sets the SO_SNDBUF option to the specified value (in bytes)

"8192"

MEDIUM

camel.sink.endpoint.tcpNoDelay

Enable/disable the TCP_NODELAY socket option.

"true"

MEDIUM

camel.sink.endpoint.connectTimeout

Timeout (in milliseconds) for establishing for a TCP connection TCP Client only

30000

MEDIUM

camel.sink.endpoint.idleTimeout

The approximate idle time allowed before the Client TCP Connection will be reset. A null value or a value less than or equal to zero will disable the idle timeout.

null

MEDIUM

camel.sink.endpoint.readTimeout

The SO_TIMEOUT value (in milliseconds) used after the start of an MLLP frame has been received

5000

MEDIUM

camel.sink.endpoint.receiveTimeout

The SO_TIMEOUT value (in milliseconds) used when waiting for the start of an MLLP frame

15000

MEDIUM

camel.component.mllp.lazyStartProducer

false

MEDIUM

camel.component.mllp.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.component.mllp.defaultCharset

Set the default character set to use for byte to/from String conversions.

"ISO-8859-1"

MEDIUM

camel.component.mllp.logPhi

Set the component to log PHI data.

"true"

MEDIUM

camel.component.mllp.logPhiMaxBytes

Set the maximum number of bytes of PHI that will be logged in a log entry.

"5120"

MEDIUM