camel-netty-kafka-connector source configuration

When using camel-netty-kafka-connector as source make sure to use the following Maven dependency to have support for the connector:

<dependency>
  <groupId>org.apache.camel.kafkaconnector</groupId>
  <artifactId>camel-netty-kafka-connector</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel Kafka connector version -->
</dependency>

The camel-netty source connector supports 120 options, which are listed below.

Name	Description	Default	Priority
camel.source.path.protocol	The protocol to use which can be tcp or udp. One of: [tcp] [udp]	null	HIGH
camel.source.path.host	The hostname. For the consumer the hostname is localhost or 0.0.0.0. For the producer the hostname is the remote host to connect to	null	HIGH
camel.source.path.port	The host port number	null	HIGH
camel.source.endpoint.disconnect	Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.	false	MEDIUM
camel.source.endpoint.keepAlive	Setting to ensure socket is not closed due to inactivity	true	MEDIUM
camel.source.endpoint.reuseAddress	Setting to facilitate socket multiplexing	true	MEDIUM
camel.source.endpoint.reuseChannel	This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well.	false	MEDIUM
camel.source.endpoint.sync	Setting to set endpoint as one-way or request-response	true	MEDIUM
camel.source.endpoint.tcpNoDelay	Setting to improve TCP protocol performance	true	MEDIUM
camel.source.endpoint.bridgeErrorHandler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	MEDIUM
camel.source.endpoint.broadcast	Setting to choose Multicast over UDP	false	MEDIUM
camel.source.endpoint.clientMode	If the clientMode is true, netty consumer will connect the address as a TCP client.	false	MEDIUM
camel.source.endpoint.reconnect	Used only in clientMode in consumer, the consumer will attempt to reconnect on disconnection if this is enabled	true	MEDIUM
camel.source.endpoint.reconnectInterval	Used if reconnect and clientMode is enabled. The interval in milli seconds to attempt reconnection	10000	MEDIUM
camel.source.endpoint.backlog	Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the accept queue can be If this option is not configured, then the backlog depends on OS setting.	null	MEDIUM
camel.source.endpoint.bossCount	When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty	1	MEDIUM
camel.source.endpoint.bossGroup	Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint	null	MEDIUM
camel.source.endpoint.disconnectOnNoReply	If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.	true	MEDIUM
camel.source.endpoint.exceptionHandler	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.	null	MEDIUM
camel.source.endpoint.exchangePattern	Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]	null	MEDIUM
camel.source.endpoint.nettyServerBootstrapFactory	To use a custom NettyServerBootstrapFactory	null	MEDIUM
camel.source.endpoint.networkInterface	When using UDP then this option can be used to specify a network interface by its name, such as eth0 to join a multicast group.	null	MEDIUM
camel.source.endpoint.noReplyLogLevel	If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]	"WARN"	MEDIUM
camel.source.endpoint.serverClosedChannelException CaughtLogLevel	If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flood of closed exceptions in the Netty server. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]	"DEBUG"	MEDIUM
camel.source.endpoint.serverExceptionCaughtLog Level	If the server (NettyConsumer) catches an exception then its logged using this logging level. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]	"WARN"	MEDIUM
camel.source.endpoint.serverInitializerFactory	To use a custom ServerInitializerFactory	null	MEDIUM
camel.source.endpoint.usingExecutorService	Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.	true	MEDIUM
camel.source.endpoint.allowSerializedHeaders	Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level.	false	MEDIUM
camel.source.endpoint.basicPropertyBinding	Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM
camel.source.endpoint.channelGroup	To use a explicit ChannelGroup.	null	MEDIUM
camel.source.endpoint.nativeTransport	Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html	false	MEDIUM
camel.source.endpoint.options	Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.	null	MEDIUM
camel.source.endpoint.receiveBufferSize	The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.	65536	MEDIUM
camel.source.endpoint.receiveBufferSizePredictor	Configures the buffer size predictor. See details at Jetty documentation and this mail thread.	null	MEDIUM
camel.source.endpoint.sendBufferSize	The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.	65536	MEDIUM
camel.source.endpoint.synchronous	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	MEDIUM
camel.source.endpoint.transferExchange	Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.	false	MEDIUM
camel.source.endpoint.udpByteArrayCodec	For UDP only. If enabled the using byte array codec instead of Java serialization protocol.	false	MEDIUM
camel.source.endpoint.workerCount	When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.	null	MEDIUM
camel.source.endpoint.workerGroup	To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads.	null	MEDIUM
camel.source.endpoint.allowDefaultCodec	The netty component installs a default codec if both, encoder/decoder is null and textline is false. Setting allowDefaultCodec to false prevents the netty component from installing a default codec as the first element in the filter chain.	true	MEDIUM
camel.source.endpoint.autoAppendDelimiter	Whether or not to auto append missing end delimiter when sending using the textline codec.	true	MEDIUM
camel.source.endpoint.decoderMaxLineLength	The max line length to use for the textline codec.	1024	MEDIUM
camel.source.endpoint.decoders	A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.	null	MEDIUM
camel.source.endpoint.delimiter	The delimiter to use for the textline codec. Possible values are LINE and NULL. One of: [LINE] [NULL]	"LINE"	MEDIUM
camel.source.endpoint.encoders	A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.	null	MEDIUM
camel.source.endpoint.encoding	The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset.	null	MEDIUM
camel.source.endpoint.textline	Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP - however only Strings are allowed to be serialized by default.	false	MEDIUM
camel.source.endpoint.enabledProtocols	Which protocols to enable when using SSL	"TLSv1,TLSv1.1,TLSv1.2"	MEDIUM
camel.source.endpoint.keyStoreFile	Client side certificate keystore to be used for encryption	null	MEDIUM
camel.source.endpoint.keyStoreFormat	Keystore format to be used for payload encryption. Defaults to JKS if not set	null	MEDIUM
camel.source.endpoint.keyStoreResource	Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.	null	MEDIUM
camel.source.endpoint.needClientAuth	Configures whether the server needs client authentication when using SSL.	false	MEDIUM
camel.source.endpoint.passphrase	Password setting to use in order to encrypt/decrypt payloads sent using SSH	null	MEDIUM
camel.source.endpoint.securityProvider	Security provider to be used for payload encryption. Defaults to SunX509 if not set.	null	MEDIUM
camel.source.endpoint.ssl	Setting to specify whether SSL encryption is applied to this endpoint	false	MEDIUM
camel.source.endpoint.sslClientCertHeaders	When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.	false	MEDIUM
camel.source.endpoint.sslContextParameters	To configure security using SSLContextParameters	null	MEDIUM
camel.source.endpoint.sslHandler	Reference to a class that could be used to return an SSL Handler	null	MEDIUM
camel.source.endpoint.trustStoreFile	Server side certificate keystore to be used for encryption	null	MEDIUM
camel.source.endpoint.trustStoreResource	Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.	null	MEDIUM
camel.component.netty.configuration	To use the NettyConfiguration as configuration when creating endpoints.	null	MEDIUM
camel.component.netty.disconnect	Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.	false	MEDIUM
camel.component.netty.keepAlive	Setting to ensure socket is not closed due to inactivity	true	MEDIUM
camel.component.netty.reuseAddress	Setting to facilitate socket multiplexing	true	MEDIUM
camel.component.netty.reuseChannel	This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well.	false	MEDIUM
camel.component.netty.sync	Setting to set endpoint as one-way or request-response	true	MEDIUM
camel.component.netty.tcpNoDelay	Setting to improve TCP protocol performance	true	MEDIUM
camel.component.netty.bridgeErrorHandler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	MEDIUM
camel.component.netty.broadcast	Setting to choose Multicast over UDP	false	MEDIUM
camel.component.netty.clientMode	If the clientMode is true, netty consumer will connect the address as a TCP client.	false	MEDIUM
camel.component.netty.reconnect	Used only in clientMode in consumer, the consumer will attempt to reconnect on disconnection if this is enabled	true	MEDIUM
camel.component.netty.reconnectInterval	Used if reconnect and clientMode is enabled. The interval in milli seconds to attempt reconnection	10000	MEDIUM
camel.component.netty.backlog	Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the accept queue can be If this option is not configured, then the backlog depends on OS setting.	null	MEDIUM
camel.component.netty.bossCount	When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty	1	MEDIUM
camel.component.netty.bossGroup	Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint	null	MEDIUM
camel.component.netty.disconnectOnNoReply	If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.	true	MEDIUM
camel.component.netty.executorService	To use the given EventExecutorGroup.	null	MEDIUM
camel.component.netty.maximumPoolSize	Sets a maximum thread pool size for the netty consumer ordered thread pool. The default size is 2 x cpu_core plus 1. Setting this value to eg 10 will then use 10 threads unless 2 x cpu_core plus 1 is a higher value, which then will override and be used. For example if there are 8 cores, then the consumer thread pool will be 17. This thread pool is used to route messages received from Netty by Camel. We use a separate thread pool to ensure ordering of messages and also in case some messages will block, then nettys worker threads (event loop) wont be affected.	null	MEDIUM
camel.component.netty.nettyServerBootstrapFactory	To use a custom NettyServerBootstrapFactory	null	MEDIUM
camel.component.netty.networkInterface	When using UDP then this option can be used to specify a network interface by its name, such as eth0 to join a multicast group.	null	MEDIUM
camel.component.netty.noReplyLogLevel	If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]	"WARN"	MEDIUM
camel.component.netty.serverClosedChannelException CaughtLogLevel	If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flood of closed exceptions in the Netty server. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]	"DEBUG"	MEDIUM
camel.component.netty.serverExceptionCaughtLog Level	If the server (NettyConsumer) catches an exception then its logged using this logging level. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]	"WARN"	MEDIUM
camel.component.netty.serverInitializerFactory	To use a custom ServerInitializerFactory	null	MEDIUM
camel.component.netty.usingExecutorService	Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.	true	MEDIUM
camel.component.netty.allowSerializedHeaders	Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level.	false	MEDIUM
camel.component.netty.basicPropertyBinding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	MEDIUM
camel.component.netty.channelGroup	To use a explicit ChannelGroup.	null	MEDIUM
camel.component.netty.nativeTransport	Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html	false	MEDIUM
camel.component.netty.options	Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.	null	MEDIUM
camel.component.netty.receiveBufferSize	The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.	65536	MEDIUM
camel.component.netty.receiveBufferSizePredictor	Configures the buffer size predictor. See details at Jetty documentation and this mail thread.	null	MEDIUM
camel.component.netty.sendBufferSize	The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.	65536	MEDIUM
camel.component.netty.transferExchange	Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.	false	MEDIUM
camel.component.netty.udpByteArrayCodec	For UDP only. If enabled the using byte array codec instead of Java serialization protocol.	false	MEDIUM
camel.component.netty.workerCount	When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.	null	MEDIUM
camel.component.netty.workerGroup	To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads.	null	MEDIUM
camel.component.netty.allowDefaultCodec	The netty component installs a default codec if both, encoder/decoder is null and textline is false. Setting allowDefaultCodec to false prevents the netty component from installing a default codec as the first element in the filter chain.	true	MEDIUM
camel.component.netty.autoAppendDelimiter	Whether or not to auto append missing end delimiter when sending using the textline codec.	true	MEDIUM
camel.component.netty.decoderMaxLineLength	The max line length to use for the textline codec.	1024	MEDIUM
camel.component.netty.decoders	A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.	null	MEDIUM
camel.component.netty.delimiter	The delimiter to use for the textline codec. Possible values are LINE and NULL. One of: [LINE] [NULL]	"LINE"	MEDIUM
camel.component.netty.encoders	A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.	null	MEDIUM
camel.component.netty.encoding	The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset.	null	MEDIUM
camel.component.netty.textline	Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP - however only Strings are allowed to be serialized by default.	false	MEDIUM
camel.component.netty.enabledProtocols	Which protocols to enable when using SSL	"TLSv1,TLSv1.1,TLSv1.2"	MEDIUM
camel.component.netty.keyStoreFile	Client side certificate keystore to be used for encryption	null	MEDIUM
camel.component.netty.keyStoreFormat	Keystore format to be used for payload encryption. Defaults to JKS if not set	null	MEDIUM
camel.component.netty.keyStoreResource	Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.	null	MEDIUM
camel.component.netty.needClientAuth	Configures whether the server needs client authentication when using SSL.	false	MEDIUM
camel.component.netty.passphrase	Password setting to use in order to encrypt/decrypt payloads sent using SSH	null	MEDIUM
camel.component.netty.securityProvider	Security provider to be used for payload encryption. Defaults to SunX509 if not set.	null	MEDIUM
camel.component.netty.ssl	Setting to specify whether SSL encryption is applied to this endpoint	false	MEDIUM
camel.component.netty.sslClientCertHeaders	When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.	false	MEDIUM
camel.component.netty.sslContextParameters	To configure security using SSLContextParameters	null	MEDIUM
camel.component.netty.sslHandler	Reference to a class that could be used to return an SSL Handler	null	MEDIUM
camel.component.netty.trustStoreFile	Server side certificate keystore to be used for encryption	null	MEDIUM
camel.component.netty.trustStoreResource	Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.	null	MEDIUM
camel.component.netty.useGlobalSslContext Parameters	Enable usage of global SSL context parameters.	false	MEDIUM

Name

Description

Default

Priority

camel.source.path.protocol

The protocol to use which can be tcp or udp. One of: [tcp] [udp]

null

HIGH

camel.source.path.host

The hostname. For the consumer the hostname is localhost or 0.0.0.0. For the producer the hostname is the remote host to connect to

null

HIGH

camel.source.path.port

The host port number

null

HIGH

camel.source.endpoint.disconnect

Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.

false

MEDIUM

camel.source.endpoint.keepAlive

Setting to ensure socket is not closed due to inactivity

true

MEDIUM

camel.source.endpoint.reuseAddress

Setting to facilitate socket multiplexing

true

MEDIUM

camel.source.endpoint.reuseChannel

This option allows producers and consumers (in client mode) to reuse the same Netty Channel for the lifecycle of processing the Exchange. This is useful if you need to call a server multiple times in a Camel route and want to use the same network connection. When using this, the channel is not returned to the connection pool until the Exchange is done; or disconnected if the disconnect option is set to true. The reused Channel is stored on the Exchange as an exchange property with the key NettyConstants#NETTY_CHANNEL which allows you to obtain the channel during routing and use it as well.

false

MEDIUM

camel.source.endpoint.sync

Setting to set endpoint as one-way or request-response

true

MEDIUM

camel.source.endpoint.tcpNoDelay

Setting to improve TCP protocol performance

true

MEDIUM

camel.source.endpoint.bridgeErrorHandler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

MEDIUM

camel.source.endpoint.broadcast

Setting to choose Multicast over UDP

false

MEDIUM

camel.source.endpoint.clientMode

If the clientMode is true, netty consumer will connect the address as a TCP client.

false

MEDIUM

camel.source.endpoint.reconnect

Used only in clientMode in consumer, the consumer will attempt to reconnect on disconnection if this is enabled

true

MEDIUM

camel.source.endpoint.reconnectInterval

Used if reconnect and clientMode is enabled. The interval in milli seconds to attempt reconnection

10000

MEDIUM

camel.source.endpoint.backlog

Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the accept queue can be If this option is not configured, then the backlog depends on OS setting.

null

MEDIUM

camel.source.endpoint.bossCount

When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty

MEDIUM

camel.source.endpoint.bossGroup

Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint

null

MEDIUM

camel.source.endpoint.disconnectOnNoReply

If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.

true

MEDIUM

camel.source.endpoint.exceptionHandler

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

null

MEDIUM

camel.source.endpoint.exchangePattern

Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]

null

MEDIUM

camel.source.endpoint.nettyServerBootstrapFactory

To use a custom NettyServerBootstrapFactory

null

MEDIUM

camel.source.endpoint.networkInterface

When using UDP then this option can be used to specify a network interface by its name, such as eth0 to join a multicast group.

null

MEDIUM

camel.source.endpoint.noReplyLogLevel

If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

"WARN"

MEDIUM

camel.source.endpoint.serverClosedChannelException CaughtLogLevel

If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flood of closed exceptions in the Netty server. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

"DEBUG"

MEDIUM

camel.source.endpoint.serverExceptionCaughtLog Level

If the server (NettyConsumer) catches an exception then its logged using this logging level. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

"WARN"

MEDIUM

camel.source.endpoint.serverInitializerFactory

To use a custom ServerInitializerFactory

null

MEDIUM

camel.source.endpoint.usingExecutorService

Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.

true

MEDIUM

camel.source.endpoint.allowSerializedHeaders

Only used for TCP when transferExchange is true. When set to true, serializable objects in headers and properties will be added to the exchange. Otherwise Camel will exclude any non-serializable objects and log it at WARN level.

false

MEDIUM

camel.source.endpoint.basicPropertyBinding

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.source.endpoint.channelGroup

To use a explicit ChannelGroup.

null

MEDIUM

camel.source.endpoint.nativeTransport

Whether to use native transport instead of NIO. Native transport takes advantage of the host operating system and is only supported on some platforms. You need to add the netty JAR for the host operating system you are using. See more details at: http://netty.io/wiki/native-transports.html

false

MEDIUM

camel.source.endpoint.options

Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.

null

MEDIUM

camel.source.endpoint.receiveBufferSize

The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.

65536

MEDIUM

camel.source.endpoint.receiveBufferSizePredictor

Configures the buffer size predictor. See details at Jetty documentation and this mail thread.

null

MEDIUM

camel.source.endpoint.sendBufferSize

The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.

65536

MEDIUM

camel.source.endpoint.synchronous

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

MEDIUM

camel.source.endpoint.transferExchange

Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.

false

MEDIUM

camel.source.endpoint.udpByteArrayCodec

For UDP only. If enabled the using byte array codec instead of Java serialization protocol.

false

MEDIUM

camel.source.endpoint.workerCount

When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.

null

MEDIUM

camel.source.endpoint.workerGroup

To use a explicit EventLoopGroup as the boss thread pool. For example to share a thread pool with multiple consumers or producers. By default each consumer or producer has their own worker pool with 2 x cpu count core threads.

null

MEDIUM

camel.source.endpoint.allowDefaultCodec

The netty component installs a default codec if both, encoder/decoder is null and textline is false. Setting allowDefaultCodec to false prevents the netty component from installing a default codec as the first element in the filter chain.

true

MEDIUM

camel.source.endpoint.autoAppendDelimiter

Whether or not to auto append missing end delimiter when sending using the textline codec.

true

MEDIUM

camel.source.endpoint.decoderMaxLineLength

The max line length to use for the textline codec.

1024

MEDIUM

camel.source.endpoint.decoders

A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

null

MEDIUM

camel.source.endpoint.delimiter

The delimiter to use for the textline codec. Possible values are LINE and NULL. One of: [LINE] [NULL]

"LINE"

MEDIUM

camel.source.endpoint.encoders

A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

null

MEDIUM

camel.source.endpoint.encoding

The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset.

null

MEDIUM

camel.source.endpoint.textline

Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP - however only Strings are allowed to be serialized by default.

false

MEDIUM

camel.source.endpoint.enabledProtocols

Which protocols to enable when using SSL

"TLSv1,TLSv1.1,TLSv1.2"

MEDIUM

camel.source.endpoint.keyStoreFile

Client side certificate keystore to be used for encryption

null

MEDIUM

camel.source.endpoint.keyStoreFormat

Keystore format to be used for payload encryption. Defaults to JKS if not set

null

MEDIUM

camel.source.endpoint.keyStoreResource

Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

null

MEDIUM

camel.source.endpoint.needClientAuth

Configures whether the server needs client authentication when using SSL.

false

MEDIUM

camel.source.endpoint.passphrase

Password setting to use in order to encrypt/decrypt payloads sent using SSH

null

MEDIUM

camel.source.endpoint.securityProvider

Security provider to be used for payload encryption. Defaults to SunX509 if not set.

null

MEDIUM

camel.source.endpoint.ssl

Setting to specify whether SSL encryption is applied to this endpoint

false

MEDIUM

camel.source.endpoint.sslClientCertHeaders

When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.

false

MEDIUM

camel.source.endpoint.sslContextParameters

To configure security using SSLContextParameters

null

MEDIUM

camel.source.endpoint.sslHandler

Reference to a class that could be used to return an SSL Handler

null

MEDIUM

camel.source.endpoint.trustStoreFile

Server side certificate keystore to be used for encryption

null

MEDIUM

camel.source.endpoint.trustStoreResource

Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

null

MEDIUM

camel.component.netty.configuration

To use the NettyConfiguration as configuration when creating endpoints.

null

MEDIUM

camel.component.netty.disconnect

Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.

false

MEDIUM

camel.component.netty.keepAlive

Setting to ensure socket is not closed due to inactivity

true

MEDIUM

camel.component.netty.reuseAddress

Setting to facilitate socket multiplexing

true

MEDIUM

camel.component.netty.reuseChannel

false

MEDIUM

camel.component.netty.sync

Setting to set endpoint as one-way or request-response

true

MEDIUM

camel.component.netty.tcpNoDelay

Setting to improve TCP protocol performance

true

MEDIUM

camel.component.netty.bridgeErrorHandler

false

MEDIUM

camel.component.netty.broadcast

Setting to choose Multicast over UDP

false

MEDIUM

camel.component.netty.clientMode

If the clientMode is true, netty consumer will connect the address as a TCP client.

false

MEDIUM

camel.component.netty.reconnect

Used only in clientMode in consumer, the consumer will attempt to reconnect on disconnection if this is enabled

true

MEDIUM

camel.component.netty.reconnectInterval

Used if reconnect and clientMode is enabled. The interval in milli seconds to attempt reconnection

10000

MEDIUM

camel.component.netty.backlog

null

MEDIUM

camel.component.netty.bossCount

When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this option to override the default bossCount from Netty

MEDIUM

camel.component.netty.bossGroup

Set the BossGroup which could be used for handling the new connection of the server side across the NettyEndpoint

null

MEDIUM

camel.component.netty.disconnectOnNoReply

If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.

true

MEDIUM

camel.component.netty.executorService

To use the given EventExecutorGroup.

null

MEDIUM

camel.component.netty.maximumPoolSize

Sets a maximum thread pool size for the netty consumer ordered thread pool. The default size is 2 x cpu_core plus 1. Setting this value to eg 10 will then use 10 threads unless 2 x cpu_core plus 1 is a higher value, which then will override and be used. For example if there are 8 cores, then the consumer thread pool will be 17. This thread pool is used to route messages received from Netty by Camel. We use a separate thread pool to ensure ordering of messages and also in case some messages will block, then nettys worker threads (event loop) wont be affected.

null

MEDIUM

camel.component.netty.nettyServerBootstrapFactory

To use a custom NettyServerBootstrapFactory

null

MEDIUM

camel.component.netty.networkInterface

When using UDP then this option can be used to specify a network interface by its name, such as eth0 to join a multicast group.

null

MEDIUM

camel.component.netty.noReplyLogLevel

If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

"WARN"

MEDIUM

camel.component.netty.serverClosedChannelException CaughtLogLevel

"DEBUG"

MEDIUM

camel.component.netty.serverExceptionCaughtLog Level

If the server (NettyConsumer) catches an exception then its logged using this logging level. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]

"WARN"

MEDIUM

camel.component.netty.serverInitializerFactory

To use a custom ServerInitializerFactory

null

MEDIUM

camel.component.netty.usingExecutorService

Whether to use ordered thread pool, to ensure events are processed orderly on the same channel.

true

MEDIUM

camel.component.netty.allowSerializedHeaders

false

MEDIUM

camel.component.netty.basicPropertyBinding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

MEDIUM

camel.component.netty.channelGroup

To use a explicit ChannelGroup.

null

MEDIUM

camel.component.netty.nativeTransport

false

MEDIUM

camel.component.netty.options

null

MEDIUM

camel.component.netty.receiveBufferSize

The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.

65536

MEDIUM

camel.component.netty.receiveBufferSizePredictor

Configures the buffer size predictor. See details at Jetty documentation and this mail thread.

null

MEDIUM

camel.component.netty.sendBufferSize

The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.

65536

MEDIUM

camel.component.netty.transferExchange

false

MEDIUM

camel.component.netty.udpByteArrayCodec

For UDP only. If enabled the using byte array codec instead of Java serialization protocol.

false

MEDIUM

camel.component.netty.workerCount

When netty works on nio mode, it uses default workerCount parameter from Netty (which is cpu_core_threads x 2). User can use this option to override the default workerCount from Netty.

null

MEDIUM

camel.component.netty.workerGroup

null

MEDIUM

camel.component.netty.allowDefaultCodec

true

MEDIUM

camel.component.netty.autoAppendDelimiter

Whether or not to auto append missing end delimiter when sending using the textline codec.

true

MEDIUM

camel.component.netty.decoderMaxLineLength

The max line length to use for the textline codec.

1024

MEDIUM

camel.component.netty.decoders

null

MEDIUM

camel.component.netty.delimiter

The delimiter to use for the textline codec. Possible values are LINE and NULL. One of: [LINE] [NULL]

"LINE"

MEDIUM

camel.component.netty.encoders

null

MEDIUM

camel.component.netty.encoding

The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset.

null

MEDIUM

camel.component.netty.textline

false

MEDIUM

camel.component.netty.enabledProtocols

Which protocols to enable when using SSL

"TLSv1,TLSv1.1,TLSv1.2"

MEDIUM

camel.component.netty.keyStoreFile

Client side certificate keystore to be used for encryption

null

MEDIUM

camel.component.netty.keyStoreFormat

Keystore format to be used for payload encryption. Defaults to JKS if not set

null

MEDIUM

camel.component.netty.keyStoreResource

Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

null

MEDIUM

camel.component.netty.needClientAuth

Configures whether the server needs client authentication when using SSL.

false

MEDIUM

camel.component.netty.passphrase

Password setting to use in order to encrypt/decrypt payloads sent using SSH

null

MEDIUM

camel.component.netty.securityProvider

Security provider to be used for payload encryption. Defaults to SunX509 if not set.

null

MEDIUM

camel.component.netty.ssl

Setting to specify whether SSL encryption is applied to this endpoint

false

MEDIUM

camel.component.netty.sslClientCertHeaders

false

MEDIUM

camel.component.netty.sslContextParameters

To configure security using SSLContextParameters

null

MEDIUM

camel.component.netty.sslHandler

Reference to a class that could be used to return an SSL Handler

null

MEDIUM

camel.component.netty.trustStoreFile

Server side certificate keystore to be used for encryption

null

MEDIUM

camel.component.netty.trustStoreResource

Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.

null

MEDIUM

camel.component.netty.useGlobalSslContext Parameters

Enable usage of global SSL context parameters.

false

MEDIUM