Dataset :: Apache Camel

URI format

dataset:name[?options]

Where name is used to find the DataSet instance in the Registry

Camel ships with a support implementation of org.apache.camel.component.dataset.DataSet, the org.apache.camel.component.dataset.DataSetSupport class, that can be used as a base for implementing your own DataSet. Camel also ships with some implementations that can be used for testing: org.apache.camel.component.dataset.SimpleDataSet, org.apache.camel.component.dataset.ListDataSet and org.apache.camel.component.dataset.FileDataSet, all of which extend DataSetSupport.

Options

The Dataset component supports 3 options, which are listed below.

Name	Description	Default	Type
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
basicPropertyBinding (advanced)	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	boolean

Name

Description

Default

Type

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

basicPropertyBinding (advanced)

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

boolean

The Dataset endpoint is configured using URI syntax:

dataset:name

with the following path and query parameters:

Path Parameters (1 parameters):

Name	Description	Default	Type
name	Required Name of DataSet to lookup in the registry		DataSet

Name

Description

Default

Type

name

Required Name of DataSet to lookup in the registry

DataSet

Query Parameters (22 parameters):

Name	Description	Default	Type
dataSetIndex (common)	Controls the behaviour of the CamelDataSetIndex header. For Consumers: - off = the header will not be set - strict/lenient = the header will be set For Producers: - off = the header value will not be verified, and will not be set if it is not present = strict = the header value must be present and will be verified = lenient = the header value will be verified if it is present, and will be set if it is not present. The value can be one of: strict, lenient, off	lenient	String
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
initialDelay (consumer)	Time period in millis to wait before starting sending messages.	1000	long
minRate (consumer)	Wait until the DataSet contains at least this number of messages	0	int
preloadSize (consumer)	Sets how many messages should be preloaded (sent) before the route completes its initialization	0	long
produceDelay (consumer)	Allows a delay to be specified which causes a delay when a message is sent by the consumer (to simulate slow processing)	3	long
exceptionHandler (consumer)	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.		ExceptionHandler
exchangePattern (consumer)	Sets the exchange pattern when the consumer creates an exchange. The value can be one of: InOnly, InOut, InOptionalOut		ExchangePattern
assertPeriod (producer)	Sets a grace period after which the mock endpoint will re-assert to ensure the preliminary assertion is still valid. This is used for example to assert that exactly a number of messages arrives. For example if expectedMessageCount(int) was set to 5, then the assertion is satisfied when 5 or more message arrives. To ensure that exactly 5 messages arrives, then you would need to wait a little period to ensure no further message arrives. This is what you can use this method for. By default this period is disabled.	0	long
consumeDelay (producer)	Allows a delay to be specified which causes a delay when a message is consumed by the producer (to simulate slow processing)	0	long
expectedCount (producer)	Specifies the expected number of message exchanges that should be received by this endpoint. Beware: If you want to expect that 0 messages, then take extra care, as 0 matches when the tests starts, so you need to set a assert period time to let the test run for a while to make sure there are still no messages arrived; for that use setAssertPeriod(long). An alternative is to use NotifyBuilder, and use the notifier to know when Camel is done routing some messages, before you call the assertIsSatisfied() method on the mocks. This allows you to not use a fixed assert period, to speedup testing times. If you want to assert that exactly n’th message arrives to this mock endpoint, then see also the setAssertPeriod(long) method for further details.	-1	int
failFast (producer)	Sets whether assertIsSatisfied() should fail fast at the first detected failed expectation while it may otherwise wait for all expected messages to arrive before performing expectations verifications. Is by default true. Set to false to use behavior as in Camel 2.x.	false	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
reportGroup (producer)	A number that is used to turn on throughput logging based on groups of the size.		int
resultMinimumWaitTime (producer)	Sets the minimum expected amount of time (in millis) the assertIsSatisfied() will wait on a latch until it is satisfied	0	long
resultWaitTime (producer)	Sets the maximum amount of time (in millis) the assertIsSatisfied() will wait on a latch until it is satisfied	0	long
retainFirst (producer)	Specifies to only retain the first n’th number of received Exchanges. This is used when testing with big data, to reduce memory consumption by not storing copies of every Exchange this mock endpoint receives. Important: When using this limitation, then the getReceivedCounter() will still return the actual number of received Exchanges. For example if we have received 5000 Exchanges, and have configured to only retain the first 10 Exchanges, then the getReceivedCounter() will still return 5000 but there is only the first 10 Exchanges in the getExchanges() and getReceivedExchanges() methods. When using this method, then some of the other expectation methods is not supported, for example the expectedBodiesReceived(Object…) sets a expectation on the first number of bodies received. You can configure both setRetainFirst(int) and setRetainLast(int) methods, to limit both the first and last received.	-1	int
retainLast (producer)	Specifies to only retain the last n’th number of received Exchanges. This is used when testing with big data, to reduce memory consumption by not storing copies of every Exchange this mock endpoint receives. Important: When using this limitation, then the getReceivedCounter() will still return the actual number of received Exchanges. For example if we have received 5000 Exchanges, and have configured to only retain the last 20 Exchanges, then the getReceivedCounter() will still return 5000 but there is only the last 20 Exchanges in the getExchanges() and getReceivedExchanges() methods. When using this method, then some of the other expectation methods is not supported, for example the expectedBodiesReceived(Object…) sets a expectation on the first number of bodies received. You can configure both setRetainFirst(int) and setRetainLast(int) methods, to limit both the first and last received.	-1	int
sleepForEmptyTest (producer)	Allows a sleep to be specified to wait to check that this endpoint really is empty when expectedMessageCount(int) is called with zero	0	long
copyOnExchange (producer)	Sets whether to make a deep copy of the incoming Exchange when received at this mock endpoint. Is by default true.	true	boolean
basicPropertyBinding (advanced)	Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	boolean
synchronous (advanced)	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	boolean

Name

Description

Default

Type

dataSetIndex (common)

Controls the behaviour of the CamelDataSetIndex header. For Consumers: - off = the header will not be set - strict/lenient = the header will be set For Producers: - off = the header value will not be verified, and will not be set if it is not present = strict = the header value must be present and will be verified = lenient = the header value will be verified if it is present, and will be set if it is not present. The value can be one of: strict, lenient, off

lenient

String

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

initialDelay (consumer)

Time period in millis to wait before starting sending messages.

1000

long

minRate (consumer)

Wait until the DataSet contains at least this number of messages

0

int

preloadSize (consumer)

Sets how many messages should be preloaded (sent) before the route completes its initialization

0

long

produceDelay (consumer)

Allows a delay to be specified which causes a delay when a message is sent by the consumer (to simulate slow processing)

3

long

exceptionHandler (consumer)

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer)

Sets the exchange pattern when the consumer creates an exchange. The value can be one of: InOnly, InOut, InOptionalOut

ExchangePattern

assertPeriod (producer)

Sets a grace period after which the mock endpoint will re-assert to ensure the preliminary assertion is still valid. This is used for example to assert that exactly a number of messages arrives. For example if expectedMessageCount(int) was set to 5, then the assertion is satisfied when 5 or more message arrives. To ensure that exactly 5 messages arrives, then you would need to wait a little period to ensure no further message arrives. This is what you can use this method for. By default this period is disabled.

0

long

consumeDelay (producer)

Allows a delay to be specified which causes a delay when a message is consumed by the producer (to simulate slow processing)

0

long

expectedCount (producer)

Specifies the expected number of message exchanges that should be received by this endpoint. Beware: If you want to expect that 0 messages, then take extra care, as 0 matches when the tests starts, so you need to set a assert period time to let the test run for a while to make sure there are still no messages arrived; for that use setAssertPeriod(long). An alternative is to use NotifyBuilder, and use the notifier to know when Camel is done routing some messages, before you call the assertIsSatisfied() method on the mocks. This allows you to not use a fixed assert period, to speedup testing times. If you want to assert that exactly n’th message arrives to this mock endpoint, then see also the setAssertPeriod(long) method for further details.

-1

int

failFast (producer)

Sets whether assertIsSatisfied() should fail fast at the first detected failed expectation while it may otherwise wait for all expected messages to arrive before performing expectations verifications. Is by default true. Set to false to use behavior as in Camel 2.x.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

reportGroup (producer)

A number that is used to turn on throughput logging based on groups of the size.

int

resultMinimumWaitTime (producer)

Sets the minimum expected amount of time (in millis) the assertIsSatisfied() will wait on a latch until it is satisfied

0

long

resultWaitTime (producer)

Sets the maximum amount of time (in millis) the assertIsSatisfied() will wait on a latch until it is satisfied

0

long

retainFirst (producer)

Specifies to only retain the first n’th number of received Exchanges. This is used when testing with big data, to reduce memory consumption by not storing copies of every Exchange this mock endpoint receives. Important: When using this limitation, then the getReceivedCounter() will still return the actual number of received Exchanges. For example if we have received 5000 Exchanges, and have configured to only retain the first 10 Exchanges, then the getReceivedCounter() will still return 5000 but there is only the first 10 Exchanges in the getExchanges() and getReceivedExchanges() methods. When using this method, then some of the other expectation methods is not supported, for example the expectedBodiesReceived(Object…) sets a expectation on the first number of bodies received. You can configure both setRetainFirst(int) and setRetainLast(int) methods, to limit both the first and last received.

-1

int

retainLast (producer)

Specifies to only retain the last n’th number of received Exchanges. This is used when testing with big data, to reduce memory consumption by not storing copies of every Exchange this mock endpoint receives. Important: When using this limitation, then the getReceivedCounter() will still return the actual number of received Exchanges. For example if we have received 5000 Exchanges, and have configured to only retain the last 20 Exchanges, then the getReceivedCounter() will still return 5000 but there is only the last 20 Exchanges in the getExchanges() and getReceivedExchanges() methods. When using this method, then some of the other expectation methods is not supported, for example the expectedBodiesReceived(Object…) sets a expectation on the first number of bodies received. You can configure both setRetainFirst(int) and setRetainLast(int) methods, to limit both the first and last received.

-1

int

sleepForEmptyTest (producer)

Allows a sleep to be specified to wait to check that this endpoint really is empty when expectedMessageCount(int) is called with zero

0

long

copyOnExchange (producer)

Sets whether to make a deep copy of the incoming Exchange when received at this mock endpoint. Is by default true.

true

boolean

basicPropertyBinding (advanced)

Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

boolean

synchronous (advanced)

Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).

false

boolean

You can append query options to the URI in the following format, ?option=value&option=value&…

Configuring DataSet

Camel will lookup in the Registry for a bean implementing the DataSet interface. So you can register your own DataSet as:

<bean id="myDataSet" class="com.mycompany.MyDataSet">
  <property name="size" value="100"/>
</bean>

Example

For example, to test that a set of messages are sent to a queue and then consumed from the queue without losing any messages:

// send the dataset to a queue
from("dataset:foo").to("activemq:SomeQueue");

// now lets test that the messages are consumed correctly
from("activemq:SomeQueue").to("dataset:foo");

The above would look in the Registry to find the foo DataSet instance which is used to create the messages.

Then you create a DataSet implementation, such as using the SimpleDataSet as described below, configuring things like how big the data set is and what the messages look like etc.

DataSetSupport (abstract class)

The DataSetSupport abstract class is a nice starting point for new DataSets, and provides some useful features to derived classes.

Properties on DataSetSupport

Property Type Default Description

Property	Type	Default	Description
`defaultHeaders`	`Map<String,Object>`	`null`	Specifies the default message body. For SimpleDataSet it is a constant payload; though if you want to create custom payloads per message, create your own derivation of `DataSetSupport`.
`outputTransformer`	`org.apache.camel.Processor`	null
`size`	`long`	`10`	Specifies how many messages to send/consume.
`reportCount`	`long`	`-1`	Specifies the number of messages to be received before reporting progress. Useful for showing progress of a large load test. If < 0, then `size` / 5, if is 0 then `size`, else set to `reportCount` value.

defaultHeaders

Map<String,Object>

null

Specifies the default message body. For SimpleDataSet it is a constant payload; though if you want to create custom payloads per message, create your own derivation of DataSetSupport.

outputTransformer

org.apache.camel.Processor

null

size

long

10

Specifies how many messages to send/consume.

reportCount

long

-1

Specifies the number of messages to be received before reporting progress. Useful for showing progress of a large load test. If < 0, then size / 5, if is 0 then size, else set to reportCount value.

SimpleDataSet

The SimpleDataSet extends DataSetSupport, and adds a default body.

Additional Properties on SimpleDataSet

Property Type Default Description

Property	Type	Default	Description
`defaultBody`	`Object`	`<hello>world!</hello>`	Specifies the default message body. By default, the `SimpleDataSet` produces the same constant payload for each exchange. If you want to customize the payload for each exchange, create a Camel `Processor` and configure the `SimpleDataSet` to use it by setting the `outputTransformer` property.

defaultBody

Object

<hello>world!</hello>

Specifies the default message body. By default, the SimpleDataSet produces the same constant payload for each exchange. If you want to customize the payload for each exchange, create a Camel Processor and configure the SimpleDataSet to use it by setting the outputTransformer property.

ListDataSet

Available since Camel 2.17

The List`DataSet` extends DataSetSupport, and adds a list of default bodies.

Additional Properties on ListDataSet

Property Type Default Description

Property	Type	Default	Description
`defaultBodies`	`List<Object>`	`empty LinkedList<Object>`	Specifies the default message body. By default, the `ListDataSet` selects a constant payload from the list of `defaultBodies` using the `CamelDataSetIndex`. If you want to customize the payload, create a Camel `Processor` and configure the `ListDataSet` to use it by setting the `outputTransformer` property.
`size`	`long`	the size of the defaultBodies list	Specifies how many messages to send/consume. This value can be different from the size of the `defaultBodies` list. If the value is less than the size of the `defaultBodies` list, some of the list elements will not be used. If the value is greater than the size of the `defaultBodies` list, the payload for the exchange will be selected using the modulus of the `CamelDataSetIndex` and the size of the `defaultBodies` list (i.e. `CamelDataSetIndex % defaultBodies.size()` )

defaultBodies

List<Object>

empty LinkedList<Object>

Specifies the default message body. By default, the ListDataSet selects a constant payload from the list of defaultBodies using the CamelDataSetIndex. If you want to customize the payload, create a Camel Processor and configure the ListDataSet to use it by setting the outputTransformer property.

size

long

the size of the defaultBodies list

Specifies how many messages to send/consume. This value can be different from the size of the defaultBodies list. If the value is less than the size of the defaultBodies list, some of the list elements will not be used. If the value is greater than the size of the defaultBodies list, the payload for the exchange will be selected using the modulus of the CamelDataSetIndex and the size of the defaultBodies list (i.e. CamelDataSetIndex % defaultBodies.size() )

FileDataSet

Available since Camel 2.17

The FileDataSet extends ListDataSet, and adds support for loading the bodies from a file.

Additional Properties on FileDataSet

Property Type Default Description

Property	Type	Default	Description
`sourceFile`	`File`	null	Specifies the source file for payloads
`delimiter`	`String`	\z	Specifies the delimiter pattern used by a `java.util.Scanner` to split the file into multiple payloads.

sourceFile

File

null

Specifies the source file for payloads

delimiter

String

\z

Specifies the delimiter pattern used by a java.util.Scanner to split the file into multiple payloads.

Spring Boot Auto-Configuration

When using dataset with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-dataset-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 7 options, which are listed below.

Name	Description	Default	Type
camel.component.dataset-test.basic-property-binding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	Boolean
camel.component.dataset-test.enabled	Whether to enable auto configuration of the dataset-test component. This is enabled by default.		Boolean
camel.component.dataset-test.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.dataset.basic-property-binding	Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities	false	Boolean
camel.component.dataset.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.dataset.enabled	Whether to enable auto configuration of the dataset component. This is enabled by default.		Boolean
camel.component.dataset.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean

Name

Description

Default

Type

camel.component.dataset-test.basic-property-binding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

Boolean

camel.component.dataset-test.enabled

Whether to enable auto configuration of the dataset-test component. This is enabled by default.

Boolean

camel.component.dataset-test.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.dataset.basic-property-binding

Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities

false

Boolean

camel.component.dataset.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.dataset.enabled

Whether to enable auto configuration of the dataset component. This is enabled by default.

Boolean

camel.component.dataset.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean